1 GAL GALLON CAN-PAINT-CAMO CAMOUFLAGE-OD GREEN OLIVE DRAB-OIL BASE FLAT DIY-450 SQ FT/GAL

1 GAL GALLON CAN-PAINT-CAMO CAMOUFLAGE-OD GREEN OLIVE DRAB-OIL BASE FLAT DIY-450 SQ FT/GAL

NOTE: This item contains lead
CA. State Proposition 65 Warning:
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Many paints, chemicals & other items are not shipable to Montana either.
(Warnings described above and below may also apply to other states as well-Check with your state before purchasing)
All buyers (Especially from any states requiring any type warnings) be advised:
This product contains some things in it that your state (or possibly some other state, or even the federal government) have found to be hazardous to you or to others in some way, as well as it being harmful to living and/or non-living things.
The paint, oils, finish, or other products used to build and ship it may be considered harmful in some way also.
Check with your federal, state, and local authorities for any warnings, restrictions, and its safety for use before buying this item.

New/unused
A flat, non-reflective finish that is rust inhibiting and water resistant to protect wood and metal from the elements.
The color selection is perfect for breaking up outlines and shapes with camouflage allowing you to blend with almost any nature background.

THIS AD IS FOR THE COLOR:
OLIVE DRAB (OD GREEN FOR YOU MILITARY PEOPLE)
SEE THE PICTURES FOR 1 GALLON CAN AND COLOR SPLOTCH PICS

NOTE:
THIS ITEM DOES NOT SHIP TO CALIFORNIA (CA EPA RULES).
DO NOT BOTHER PURCHASING IF YOUR ADDRESS IS IN CA, THE SALE WILL BE TERMINATED.

ALL OTHER 47 STATES WELCOME.

• Oil based flat paint
• Flat, non-reflective finish
• Water resistant
• Provides camouflage with any nature background
• Perfect for use on vehicles, boats, trailers, duck blinds, free stands, ladders, ladder stands, guns, bows, etc.
• Drytime-Touch: 5-10 Hours
• Drytime-Recoat: 24 Hours
• Film Thickness Wet: 3 mils
• Film Thickness Dry: 1.5 mils
• Finish: Flat
• Gloss: 0-3 @ 60 Degrees
• Flashpoint: 108 Degrees F
• Coverage: Approx 450 sq ft/gal
• Viscosity: 90-95 KU
• Vehicle: Alkyd
• Solvent: Aliphatic

SURFACE PREP:
Bare Metal:
Remove all rust scale with wire brush or sander.
Remove oil or grease with paint thinner.
Prime with rust inhibiting primer.

Painted Metal:
Remove loose or peeling paint and rust scale with wire brush or sander.
Remove oil or grease with paint thinner.
Prime any bare metal with rust inhibiting primer.

Painted Surfaces : (General) Make sure surface is clean, dry and free of loose paint, dirt, wax, grease, etc.
Sand glossy areas.
Spot prime absorbent areas.

APPLICATION:
Stir thoroughly.
Apply with a high quality brush, roller, paint pad or by spray equipment.
Where necessary, apply a second coat and allow each coat to dry thoroughly before applying the next coat.
Do not apply if surface temperature is below 50 degrees F (10 Degrees C) or in direct sunlight.
On unpainted surfaces, sand lightly and apply two coats for best results, sanding lightly between coats.

WARNING:
If you scrape, sand or remove old paint, you may release dust.
LEAD IS TOXIC.
EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN.
PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE.
Wear a NIOSH approved respirator to control lead exposure.
Clean up carefully with a HEPA vacuum and wet mop.
Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.

UPS Ground shipping.
Shipping is to the payment address only.
Tracking numbers provided.
Price includes shipping to lower US states (Buyer pays the added costs if shipping to Alaska & Hawaii).

See the FAQ pages for precautions, warnings and answers to other questions.

Hardacrefarm